Amphenol Corporation

500

This is a high-speed data transmission connector, belonging to Amphenol's industrial standard series. Its core function is to achieve high-speed signal connection between circuit boards, support differential signal transmission, and ensure data integrity and anti-interference capability.

Bourns Inc.

500

This is a precision multi-turn potentiometer (adjustable resistor). Its core function is to precisely adjust the resistance value (20kΩ) by rotating the axis, which is used for voltage distribution in circuits, current regulation, or signal calibration, providing stable parameter adjustment capabilities.

Intel

100

Cypress

500

This is a low-power stereo audio codec that integrates a headset driver. Its core function is to achieve bidirectional conversion between analog audio signals and digital audio data, supporting recording and playback functions, and is suitable for portable audio devices.

XMD(Xilinx)

500

This is a high-performance, low-power CPLD device based on the XL series architecture. Its core function is to implement user-defined digital logic functions through programmable logic units, making it suitable for interface conversion, timing control, and system integration.

Microchip Technology Inc.

500

This is a 2Kbit serial electrically erasable read-only memory that adopts a Microwire synchronous serial interface. Its core function is to provide non-volatile data storage for the system, which is used to save device configuration parameters, calibration data or operation logs.

Texas Instruments

500

This is a synchronous step-down converter with a 6A output current, packaged in SOT-23. Its core function is to convert a higher input voltage into a stable low voltage, providing an efficient power supply for high-current loads such as processors and FPGAs.

Texas Instruments

500

This is a single-channel low-capacitance ESD protection diode, specially designed for high-speed data lines.This is a single-channel low-capacitance ESD protection diode, specially designed for high-speed data lines. Its core function is to provide electrostatic discharge and electrical overload protection, preventing sensitive chips from being damaged when subjected to electrostatic shocks.

Texas Instruments

500

This is a general-purpose JFET-input operational amplifier, packaged in an 8-pin DIP format. Its core function is to provide high input impedance and low bias current for analog signal amplification, and is suitable for circuits such as high-impedance sensor interfaces, integrators, and active filters.

Onsemi

200

This is a Schottky barrier diode that achieves low voltage drop rectification through a metal-semiconductor junction. Its core function is to provide efficient rectification and reverse polarity protection in high-frequency switching circuits, making it suitable for applications that require low power consumption and high speed.

Texas Instruments

500

This is a single-channel single-pole double-throw analog switch, designed with advanced CMOS technology. Its core function is to achieve switchable path selection for analog or digital signals, and support flexible routing of audio, data and low-voltage signals.

JST

200

This is a 4-core PH series wire-to-board connector with a side-locking structure. Its core function is to achieve plug-and-play electrical connection between wires and printed circuit boards, providing reliable signal transmission and power distribution.

Richtek Technology

500

This is an efficient synchronous voltage reduction converter that integrates upper and lower power MOSFETs and supports high current output. Its core function is to convert a higher input voltage into a stable low voltage, providing an efficient and reliable power supply for loads such as processors and memory.

Renesas Electronics

500

This is a 24MHz high-precision crystal oscillator, with a surface mount packaging. Its core function is to provide a stable and reliable 24MHz reference clock signal, which serves as a synchronization timing and clock reference for digital systems such as microprocessors, FPGAs, and communication chips.

TI

300

This is a high-precision and low-drift 10V reference voltage source chip. Its core function is to provide an extremely stable and precise 10V output voltage, which serves as a voltage reference for analog-to-digital converters (ADC), digital-to-analog converters (DAC), or precision measurement systems, ensuring the measurement or control accuracy of the entire system.

Onsemi

200

This is an N-channel enhancement-mode power MOSFET, designed with advanced trench technology, featuring low on-resistance and high switching speed. It is suitable for high-efficiency switch control in high-frequency switching power supplies, motor drives, and power conversion circuits.

Microchip Technology Inc.

1000

This is an 8-bit enhanced mid-range PIC microcontroller, integrating 14KB flash memory, 1KB SRAM and 256B EEPROM, and supporting nanoWatt XLP ultra-low power technology. Its core function is to achieve device control, sensor data processing and communication interface management through programmable logic.

Semtech Corporation

500

This is a low-capacitance, multi-channel transient voltage suppression diode array, specifically designed for ESD protection in high-speed interfaces. It can withstand a contact discharge of 30kV and provides protection for multiple high-speed data lines, preventing electrostatic discharge from damaging the internal chips. It is mainly used in high-speed interfaces such as HDMI, USB 3.0/3.1.

Diodes Incorporated

1000

This is a dual-channel load switch with low on-resistance. It can control the on-off of two independent power channels through logical signals, achieving precise power timing management and power consumption control. It is mainly used in portable devices, servers and communication equipment, providing efficient power distribution and switch control for different functional modules.

Qualcomm

300

This is a high-performance RF front-end power amplifier module. It integrates power amplifiers for 2.4GHz/5GHz frequency bands, low-noise amplifiers, switches, and related control circuits, specifically designed for Wi-Fi 6 network devices. It is mainly used in wireless routers, access points, and enterprise-level network devices to enhance the transmission power of wireless signals and the reception sensitivity.